Console / Dimmer / Distro

4-Channel 600W-Lightronics LMX,Dimmer Pack PBG

4-Channel 600W-Lightronics LMX,Dimmer Pack PBG

The AS40D is a compact portable 4 channel light dimmer. It has a maximum capacity of 600 Watts per channel and a maximum TOTAL load capacity of 2400 Watts. It is supplied with an input power cord which may be connected to a 120 VAC, 20 Amp power circuit. The unit operates using the USITT DMX-512 protocol. The AS40D may be operated in a relay (non-dim) mode. The unit will also function as a stand alone chaser and has eight primary preset chase patterns which may be used.
4 Channels

600W per Channel 8 Built in Chases

Relay Mode Switchable

DMX-512 Protocol

5 Amp Fuses

Edison Output

120V

More information may be found at: http://www.lightronics.com/
6-Channel Lightronics Dimmer Pack 1.2kW

6-Channel Lightronics Dimmer Pack 1.2kW

The AS62D is a compact portable 4 channel light dimmer. It has a maximum capacity of 1200 Watts per channel and maximum total load capacity of 4800 Watts. It is supplied with 2 input power cord stubs which may be connected to 2 different 120 VAC power phases. The unit operates using the USITT DMX-512 protocol or an industry standard three wire multiplex protocol. The AS62D may be operated in a relay (non-dim) mode. The unit will also function as a chaser and has several preset chase patterns which may be used.

6 Channels

1200W per Channel

4800 Watts Total Capacity 8 Built in Chases

DMX-512 & LMX-128Relay Mode Switchable

Edison Outputs

120V

More information may be found at: http://www.lightronics.com
Avolite Diamond 4 Vison

Avolite Diamond 4 Vison

This Diamond 4 Vision is designed for large-scale shows, festivals, concerts, events and multi-purpose venues.

It addresses the needs of lighting designers needing fast, accurate and immediate control of numerous intelligent lights, conventional fixtures and other DMX devices.

Avolites - after intensive user research - has designed a console that is equally at home in live ‘hands-on’ situations as it is in more controlled ‘pre-programmed’ environments.

The D4 Vision addresses the whole spectrum of production situations. For those with more time - and possibly with a designer away from the console - the Vision’s newly designed programming panel allows the entry and selection of fixtures and palettes by number, whilst the electronic palette gives entry by legend. These entry systems can be mixed in any way, and are always available simultaneously.

Also new is the storing of Times within a Palette, expanding the ability to use Palettes during live performance, and ensuring a highly flexible toolkit for use during programming. The built-in Looks and Palettes, and the D4 Vision’s easy use, enables operation of a show when there’s been no pre-programming whatsoever.

In addition to the 24 high resolution graphic LCD screens, dual high resolution colour monitors ensure that the D4 Vision’s information is presented and formatted in an easy-to-understand-style.

All data is stored on the console’s hard disk, and can be backed up onto floppy/CD or copied via the Ethernet connection to a PC.

The D4 Vision retains the Avolites tradition of being built-to-last in all respects. Robust physical construction is coupled with full upgrade-ability using the in-built modem for Internet connection whenever and wherever required.

More information may be found at: https://www.avolites.com
Avolite Diamond III

Avolite Diamond III

The Avolites Diamond allows every user to become a power user, designed for those who require easy control of very large numbers of moving and generic lights.

The Diamond continues the Avolites philosophy of fast, friendly hands-on access for live environments while retaining the channel faders and preset bump buttons that are known and loved.

Ultra-smooth optical encoders, a vast programming palette and many automatic features have been included to give state-of-the-art moving light control. The Diamond is ideal for numerous applications and is equally suited to a large multi-purpose venue, a complex theatrical performance or a major concert tour.

The Diamond is supplied with over 60 fixture personality templates and custom personalities may be supplied on request. A number of "Future proof" features include non-volatile flash memory which holds the operating system. Software enhancements and developments are free for life and both Diamond II and Diamond III are fully disk compatible.

Unique features such as "Chase Unfold" are joined by additional shortcut programming functions made possible through the latest software. These include the "Shape Generator" which creates circles, iris and colour patterns at the touch of one button, "Fan Mode" which spreads and twists moving light beams evenly and "highlight/lowlight" for positional editing. Timed Focus Recall allows times to be applied to the Preset Focus Palette for ultimate buskability!

More information may be found at: https://www.avolites.com
Avolite Pearl Expert 30/60

Avolite Pearl Expert 30/60

TITAN Operating System

Stage Visualizer

80 Submasters - Capable of controlling cues, cue lists and chases.

60 Direct Access Add & Swop Buttons - Giving more channels to flash or solo and twice as many programming pallets.

Keyboard Discreet QWERTY keyboard with integral Trackpad and Function keys, effortlessly accessed from within the console.

Master faders Separate master level controls for Add/Flash, Swop/Solo and Presets A&B.

Dual Playback rollers

Ethernet output Artnet protocol fully supported and enabling 12 full speed DMX Universes.

DMX Output Ports Four full speed, individually opto-isolated and floating Outputs giving 2,048 DMX Channels. Separate DMX Processors for full speed, 44Hz DMX. Avolites enables customising of DMX parameters including Break Length, Mark After Break and Interbyte Timing.

More information may be found at: https://www.avolites.com
Avolite Sapphire Touch

Avolite Sapphire Touch

Massive, vibrant 15.6" widescreen programming windows.

Fast, live and hands on attribute controls.

Unique Tricolor illuminated tracker ball with Z axis control to give fast control of distance related attributes - zoom, iris, and focus. Connectivity with Sapphire Touch Wing and Sapphire Media Wing (sold separately - contact your Full Compass Sales Professional for more information).

Dedicated theatre cue stack control.

Huge programming surface – capacity for 2 external touch screens.

20 programmable macro buttons Screen articulation.

45 motorized, automated master playbacks.

Built in UPS battery backup.

8 physical DMX outputs, up to 16 over ArtNet or sACN- 8192 channels.

Supports Titan Network Processors for DMX expansion up to 64 universes.

Dual Ethernet port Direct SMPTE in.

MIDI In, Out, and Through.

Trigger Inputs.

More information may be found at: https://www.avolites.com
Avolite Tiger Touch

Avolite Tiger Touch

Titan Operating System

Bright LCD Touchscreen

Built-in UPS 10 + 10 Playback Faders

4 physical DMX outputs, up to 16 over ArtNet or sACN - 8192 channels

Supports Titan Network Processors for DMX expansion up to 64 universes

Three metal shaft optical encoders offering luxurious precision 10 pageable playbacks, 60 pages 10 static playbacks – perfect for instant access MIDI support for MIDI Notes and MIDI Timecode

Trigger inputs Dual Ethernet port

Expandable control surface via wings, DMX In, or MIDI

Dedicated cue stack control

Support for external touch screen 10 programmable executor buttons

Conveniently accessible front loading USB

More information may be found at: https://www.avolites.com
BCI Pocket Console

BCI Pocket Console

Levels are set using eight faders (slider pots)

Each FADER has an associated bump button

512 dimmer addresses are patchable to any of the eight faders

The faders are patchable using from 0 to 512 dimmer addresses per fader

The unit is powered by a 9v battery OR by a 120v AC power supply

More information may be found at: https://dmx2go.com
ClearCom Belt Pack

ClearCom Belt Pack

The RS-601 is a single channel wired beltpack with a 4-pin male headset connector and 3-pin female/male loop through intercom line connectors. The beltpack has a 2.5mm AUX headset connector and an RS-232 data connector for programming. The beltpack can be programmed using V-pack software (sold separately, give us a call), which does not require the beltpack to be opened or any dip switches changed.

• Sidetone adjustment
• Customize the following settings: Latch disable, Talk disable, Call-on-talk, Call tone, Electret Mic On/Off and Hi/Lo, Lockout

More information may be found at: http://www.clearcom.com
ClearCom PK-5 1-Channel and 2-Channel Power Supply

ClearCom PK-5 1-Channel and 2-Channel Power Supply

The PK-5 supplies 24 volts DC at .4 amp to the system. The fully regulated, current-limited unit also provides proper termination for the intercom system. The PK-5 features both short-circuit and reverse-polarity protection. The power supply is housed in a rugged metal chassis. Three separate 3-pin XLR connectors are provided for intercom audio and power output to the headset stations. Use Y-type line splitters on these connectors to attach additional headsets to the system. The PK-5 power supply is UL and CSA listed.

More information may be found at: http://www.clearcom.com
ClearCom Single & Double Muff Headsets

ClearCom Single & Double Muff Headsets

High-quality dynamic cardioid microphone20 Hz - 20 KHz frequency responseChoice of earpads: leatherette or soft foamF0lexible gooseneck microphone positioningBoom rotataion ON/OFF switch for quick microphonemutingInterchangeable cabling for easy connector changingand repairFully serviceable headsetStorage bag included

Clear-Com CC-110 Specifications:

HeadphoneType: Closed-back Driver: 36mm diameter, neodymium magnet, copper-clad aluminum wire voice coil Frequency Response: 20Hz v- 20kHz

MicrophoneElement: Dynamic Driver: 15mm, neodymium magnet Polar Pattern: Cardioid Frequency Response: 250 Hz - 20 kHz

Sensitivity: 99 dB +/-3 dB (SPL); at 1 kHz typicalPowerMaximum: 500 mW

Impedance:Headphone: 400 ohms +/- 30%; at 1 kHz typical Microphone: 200 ohms +/- 30%; at 1 kHz typical

ConnectorCable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR

Doug Fleenor Designs Onto Isolated Splitters

Doug Fleenor Designs Onto Isolated Splitters

The DMX512 Isolated Splitter / Amplifier is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with protection from miswiring and lightning, and a universal power supply is also available (see model 125EE). Units with any number of inputs and outputs may be manufactured on a custom basis.

Each output is electrically isolated from the input, and every other output, by 2500 volt optical couplers. Each output has its own line driver and associated power supply.

More information may be found at: http://www.dfd.com
Elation Opto Branch 4 & 8

Elation Opto Branch 4 & 8

The OPTO BRANCH 4™ is a single rack space, 4-way distributor/booster with 3pin and 5pin XLR input and output jacks. This unit takes the incoming DMX signal and splits it to four (4) separate outputs that are electronically isolated from each other to ensure uninterrupted data. In addition, each output has dedicated drivers to boost the incoming signal, and the unit includes a link / terminate button for easy troubleshooting.

More information may be found at: http://www.elationlighting.com
High End Road Hog Full Boar 4

High End Road Hog Full Boar 4

Robust Hog 4 Operating SoftwareUnlimited number of simultaneous crossfades

Two internal 15.6-inch wide screen touchscreens with 10 point multi touch

Two external monitors or touchscreens supported

Five encoders for an expanded wheelset

Twelve LCD User Keys

Tri Axis backlit trackball, with rotary encoder for the third axis and four configurable buttons for cursor and position control

Ten motorized playback faders

One motorized Grand Master

Four fixed universes of DMX 512 and up to 12 universes of DMX 512 over ArtNet or sACNHog-Net Ethernet connector

Fixture-Net Ethernet connectorInternal Solid State Hard disk drive

Five USB ports for Wholehog wings and external touchscreens

Desklights, feedback LEDs, and integrated worklight all dimmable

Auto-ranging mains input (90-250VAC)

Light Converse Visualizer dongle included

Dust cover included

Custom road case included

More information may be found at: https://www.highend.com
Leprecon LP 612

Leprecon LP 612

The compact LP600 series stage lighting consoles are fully featured, easy to operate, and designed to withstand the most demanding conditions. Combining high performance with an intelligent layout allows users to operate the lighting console in manual or memory mode. Available in 12 or 24 channels, the LP-612 and LP-624 consoles come equipped with DMX and Microplex and are an industry standard for rental houses, small theatres, Houses of Worship, A / V companies, and schools.

Elementary school comments on their LP 612 console saying "Thank you for providing such a budget friendly console that will allow small schools like these to have a theater program."

The LP-600 series features:
* Two Scene Preset Mode
- Allows manual control of lighting
* Softpatch
- Control up to 96 dimmers on 12 or 24 faders
* Chase Memory
- Easy to program chases, make lighting run a continuous pattern
* Cue Stack and Go Button
- Playback of a show using one button to advance scene to scene
* Four Pages of Playback Memories
- 48 or 96 locations to store presets
* Simultaneous DMX and Microplex control output
- Use with virtually any dimmer for updating systems or rentals

More information may be found at: http://www.leprecon.com
Leprecon LP1524 and LP1548

Leprecon LP1524 and LP1548

The Leprecon LP-1500 series consoles offer the ease of a manual console with the sophistication of a memory console. Available with 24, 36 or 48 faders, this series will store up to 576 fader presets. Cue stack allows up to 288 with point cues with crossfader and “Go Button” with up/down fade times. Chase memory includes four programmed and seven programmable patterns of up to 20 steps. Standard control output includes DMX and MIDI with optional Analog available. Includes Littlite work lamp.

More information may be found at: http://www.leprecon.com
Leprecon LP1624 and LP 1648

Leprecon LP1624 and LP 1648

The Leprecon LP-1600 Series offer the ease of a manual console with the sophistication of a memory console. Available with 24/48 or 36/72 faders, this series will store up to 432 fader presets. Cue stack allows up to 288 with point cues with crossfader and “Go Button” with up/down fade times. Chase memory includes four programmed and seven programmable patterns of up to 20 steps. Proportional patch, MIDI input, and DMX outputs are standard features.

More information may be found at: http://www.leprecon.com
Leprecon Tree-Mount Dimmer

Leprecon Tree-Mount Dimmer

When it comes to a dimmer pack you can trust, the ULD ranks as the industry leader in small portable treemount dimmer packs. Production and rental companies alike have come to rely on the ULD dimmers for a wide variety of uses. The solid design and construction assure that they will handle the most demanding conditions no matter what the environment. Schools and houses of worship will also appreciate the simple setup and rock solid performance. Choose from stage-pin, Edison or socapex output connectors.

Features include:
4 & 6 channel models
1800 & 3600 watt models
15 amp, 1800 & 3600 watt models w/Nema 5-15 power plugs, ETL listed
20 amp, 3600 watt models with 2 Nema 5-20 power plugs
Stage-pin, Edison or socapex outputs
LED Display
4 programmable output settings per channel
- Linear, non-dim, fluorescent, or fixed intensity
Over-temp/Over-volt protection
25 amp SSR power devices for reliability
Encapsulated chokes for quiet operation
Built-in mounting bracket

More information may be found at: http://leprecon.com
Leprecon VX Dimmer Rack: 48-Channel & 24-Channel

Leprecon VX Dimmer Rack: 48-Channel & 24-Channel

VX touring racks provide ease of use and service that you demand in a touring rack. Quiet operation makes them ideally suited for corporate, theater and ballroom events. 48-Channel and 24-Channel is 2.4kW.

• Simultaneous Digital DMX-512 & Analog Input
• Full Function LED Indication
• 100% Duty Cycle
• Easy Access Hot Patch Bay
• Heavy Duty Back to Back Power Modules

 

More information may be found at: http://leprecon.com
Lightronics FC-48

Lightronics FC-48

Lightronics FC-48 LMX/Microplex foot operated lighting controller, 8 chnl, 4 scenes, audio sync, scene fade rate and chase rate controllable.

More information may be found at: http://www.lightronics.com
Lightronics TL-3216

Lightronics TL-3216

Lightronics TL-3216 LMX/Microplex memory control lighting console, 32 or 16 chnl depending on mode (16 chnl x 2 scene / 32 chnls x 1 scene), 16 memory scenes (2 manual), 2 programmable 23 step chases.

More information may be found at: http://www.lightronics.com
Lightronics TL-3256

Lightronics TL-3256

32-CHANNEL, 128-SCENE MEMORY CTRL, 256 DIMMER SOFTPATCH

More information may be found at: http://www.lightronics.com
Lightronics TL-4008

Lightronics TL-4008

The TL4008 lighting control console is suitable for church, stage, theater, disco, night club, live performances and other event and artistic applications.

Features of the TL4008 include: grand master fader, split dipless crossfader, momentary "bump" buttons, and blackout control. Two 40 step chases may be run simultaneously for complex patterns. Chase rate is set by tapping the rate button at the desired rate. Scenes and chases stored in the unit are not lost when the unit is turned off.

LED Compatible16 Channels

8 Scenes

2 Programmable Chases

More information may be found at: http://www.lightronics.com